Vineyard and Winery Supplies by Spec Trellising
Vineyard and Winery Supplies by Spec Trellising Contact Us FAQs E-mail Spec Trellising Back Home
E-mail Spec Trellising
Vineyard Wire Stakes & Extenders Vine Shelters Vine Tying Moveable Wire Clips Irrigation Products Wildlife Control
Trellising Hardware Winery Supplies Vineyard Supplies
   
 

SnapMax™

Designed to be the most user-friendly vine shelter on the market, the SnapMax Vine Shelter suppresses lateral growth, maximizes vine survivability during the first twelve months, and reduces vine management costs. Snapmax Vine Shelters are quickly and easily assembled and removed. The interlocking side tabs allow for easy assembly and removal as well as for easy access to the vines. The top-folding flap allows for the Snapmax Vine Shelter to be attached directly to the cordon wires that are approximately 30 inches off the ground. Side slots can be used to secure the SnapMax directly to a variety of vine supports, including bamboo, rebar and pencil rod. An optional wire clip can be used to secure the SnapMax to cordon wires of varying heights.

See below for assembly instructions

SnapMax Vine Shelters provide the following benefits to growers
  • protection from wind (sandblasting, storm protection, etc…)
  • increased survivability rate of vines through the first twelve months
  • enhanced growth rates up to 2-3 times faster then unprotected vines
  • protection and safety from predators, (rabbits, deer, raccoons, etc…)
  • herbicide protection for weed control
  • reduced overhead
  • reduced labor savings (reduces vine management costs)
  • reduced irrigation costs due to water conserving benefits of SnapMax
  • reusable for several years
SnapMax Features
  • interlocking tabs for fast, easy assembly and removal
  • easy access to vines without opening the entire shelter
  • ventilation holes (if activated)
  • top, folding flap enables SnapMax to be attached to trellis wires located at 30" height
  • durable, able to last 3 season
  • stays secure in the strongest winds
  • optional wire clip to attach SnapMax to trellis wires of various heights
SnapMax Assembly

1.

Fold sides along creased lines.
Always start from the top of the guard.

2.

Hold a tab in between each thumb and forefinger and pull them across each other.

 

3.

Cordon / dripper wire sits in saddle at the top of the guard. Fastening tab folds forward over the wire.

4.

Mound / bury the Snapmax™ base 2 - 3 cm in the ground to ensure it is 100 percent herbicide and rodent free.

 
   
 
fast and easy to apply
easy access to vines
long life yarn
protects crop loss
Click here for more info on Vinenet
 
Spec Trellising

 

 
 
  Spec Trellising . . . When Quality Counts!  
Vineyard Wire Stakes & Extenders Vine Shelters Vine Tying Moveable Wire Clips Irrigation Products Wildlife Control Trellising Hardware Winery Supplies Vineyard Supplies
© 2007 - Kodiak Graphics - All Rights Reserved
www.kodiakgraphics.com - webmaster@kodiakgraphics.com